Fibaro Z-Wave Flood Sensor

In stock

Fibaro Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery (ca. 2 years battery life) or VDC powered (12 or 24 VDC).

The device has built in temperature sensor. Fibaro Flood Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by connected wire. The device has built in LED indicator and acoustic alarm. In addition, the sensor is equipped with a tilt sensor. LED diode signals flood, operating mode or the Z-Wave network communication range. Fibaro Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signal in case of substantial inundation of water.

1250 Reward Points will be used to purchase this product
• Compatible with any Z-Wave network controller,
• May be connected to any alarm system (potential free output terminal),
• Extremely easy installation - simply put on a surface prone to flooding,
• May be installed anywhere - flood sensor’s contacts extended with a wire,
• Battery or VDC powered. When connected to an external, VDC power source, the 
  battery serves as an emergency power source, 
• Theft protection - tilt is reported to the Z-Wave network or alarm system’s main controller,
• Two operating modes - flood / temperature sensor or just a temperature sensor.
Power 12 - 24 VDC (optional)
RF Protocol Z‐Wave
Battery Type CR123A
RF Frequency 921.42Mhz ‐ AU/NZ
Applicable Dangerous Goods Regulations Not Applicable

Submit your review to Earn 1 Reward Points click here to login

Your Rating